RAFIX 22 QR, illuminated selector switch, round collar, short lever, frontring slate gray, 1 x 40°, momentary contact function, illuminable

Article number: 1.30.242.501/0207

Technical data

General
Front ring color	slate gray
Collar shape	round
Operating temperature, min.	-25 °C
Operating temperature, max.	70 °C
Storage temperature, min.	-40 °C
Storage temperature, max.	80 °C
illuminated	Yes
Packaging	Box
Packaging unit	10 pcs.
net weight	21.7 g
Operating life	500,000 cycles
B10	650,000 cycles
Degree of protection, front side, according to DIN EN 60529	IP65
Environment resistance	IEC 60068-2-14 IEC 60068-2-30 IEC 60068-2-33 IEC 60068-2-78
Protection class	II
MOQ order	10 pcs.
RoHS compliant	Yes
REACH compliant	Yes

Mounting dimensions
Outside dimension, length	29.8 mm
Outside dimension, width	29.8 mm
Outside dimension, height	45.1 mm
Mounting hole	22.3 mm
Mounting depth	56.4 mm
Installation height	22.2 mm
Grid, min.	50 x 30 mm
Collar dimension	ø 29,8 mm
Mechanical characteristics
Actuation function	momentary contact function
Operating torque, max.	2 Nm
Rotating angle	1 x 40°
Fixing	Threaded ring
Threaded ring torque, max.	1.2 Nm

Drawings

Dimensioned drawing

System drawing

front panel drawing

Description

RAFIX control units are modular units consisting of several parts. In the RAFIX 22 QR family, they always consist of an actuating element, coupling, and switching element, or of a light attachment, coupling, and lamp socket. For assembly, the switching elements and lamp holders are first snapped into the coupling. Then this unit is snapped onto the actuating element or the signal lamp. To release, a bayonet lever must be actuated.

Actuating elements (such as pushbuttons or emergency stop actuators) have the specified tactility and function only when assembled with the appropriate switching elements. For illuminated actuators and illuminated attachments, please use a lamp socket / LED element as the middle element in the coupling.

For RAFIX 22 QR actuating elements, you can choose between two collar shapes: round and square. The mounting diameter is 22.3 mm according to the standard. The anti-rotation lug can be easily removed with a screwdriver if necessary.

Additional information according to UL certificate:

These devices should be mounted in an overall enclosure with sufficient stability and with the specified clearances.

Main areas of application

Measurement-control-regulation
Electrical engineering
Mechanical and system engineering
Vehicle construction

Special features

Translucent rotary handle markings, illuminable
Design adaptations through different front ring colors
For selector switches with three switching positions (e.g. 2 x 90 degrees with neutral position), the left or right switching element is actuated depending on the direction of rotation.
Firmly molded collar seal, cannot twist or be lost during installation.
1-person mounting: the element is clamped by the seal in the mounting hole and can then be screwed from behind.
Robust - suitable also for operation with gloves
Degree of protection: IP 65 at the front
Additional protection against twisting due to threaded ring with claw
Installation diameter 22.3 mm
Separate switching elements required
Close mounting of actuators possible (min. 30 x 50 mm), as wiring is axial from behind
Switching elements with silver contacts (max. 400 V) or gold contacts (max. 35 V / 100 mA)
Connection types switching elements: cage clamp, screw connection or plug-in connection