RAFIX 22 QR, LED element, screw terminal, without coupling, 24V, LED red

Article number: 5.00.070.083/0300

Technical data

General
Color	black
Luminous element color	red
Operating temperature, min.	-20 °C
Operating temperature, max.	65 °C
Storage temperature, min.	-40 °C
Storage temperature, max.	80 °C
illuminated	Yes
Luminous elements	LED
Packaging unit	10 pcs.
net weight	12.6 g
Environment resistance	IEC 60068-2-14 IEC 60068-2-30 IEC 60068-2-33 IEC 60068-2-78
Shock resistance according to standard IEC 60068-2-27	50 g at 11 ms amplitude semi-sinusoidal
Vibration resistance according to standard IEC 60068-2-6	10 g at 40 - 500 Hz
MOQ order	10 pcs.
RoHS compliant	Yes
REACH compliant	Yes

Mounting dimensions
Outside dimension, length	10 mm
Outside dimension, width	46 mm
Outside dimension, height	39.5 mm
Mounting depth	56.4 mm
Mechanical characteristics
Fixing	Latching
Terminal on the rear	Screw terminal
Abisolierlänge	8 mm
Wire end sleeve required	Ja
Electrical characteristics
Operating voltage of the luminous element, max.	24 V
Voltage type	AC / DC
Rated operating voltage	24 V
Power loss	0.38400 W
Maximum connection cross section	1.5 mm²
Minimum connection cross section	0.25 mm²

Drawings

Dimensioned drawing

Description

RAFIX control units are modular units consisting of several parts. In the RAFIX 22 QR family, they always consist of an actuating element, coupling, and switching element, or of a light attachment, coupling, and lamp socket. For assembly, the switching elements and lamp holders are first snapped into the coupling. Then this unit is snapped onto the actuating element or the signal lamp. To release, a bayonet lever must be actuated.

For illuminable actuators and indicator lights, please use a lamp socket / LED element as the middle element in the coupling.

Switching elements marked in different colors prevent confusion in the bearing and when connecting:

1/2 NC contacts = 1/2 red side cover
1/2 normally open contacts = 1/2 green side covers
1 NC and 1 NO contact = 1 red and 1 green side cover
Silver contacts = housing base color black
Gold contacts = housing base color gray
Lamp socket and LED element = completely black
The connections belonging to a pair of contacts are marked in color on the connection side and provided with contact identification numbers: 1-2 = NC contact, 3-4 = NO contact

Main areas of application

Measurement-control-regulation
Electrical engineering
Mechanical and system engineering
Vehicle construction

Special features

LED element with screw connection
Recommendation for clear colors: LED color = bezel color
Mounting by snapping on (on coupling) and actuator / light attachment
Mounting always at the middle coupling position
The connections are open, wiring can start immediately
The screws are captively fixed in the clamping position
Time and material savings due to omission of wire end ferrules for stranded wires
Rigid wires and stranded wires can be used
Less wiring effort by inserting the cables from the rear, as no bending of the wires is necessary.
Connection identification: X1 = plus, X2 = minus
Disassembly by loosening the bayonet lever of the coupling