RAFIX FS switching element emergency stop PCB, silver, for THT LED, 2 NC
Article number: 1.20.126.604/0000
Technical data
General |
|
Disassembly possible | no |
Color | black |
Operating temperature, min. | -40 °C |
Operating temperature, max. | 85 °C |
Storage temperature, min. | -40 °C |
Storage temperature, max. | 85 °C |
illuminated | Yes |
Luminous elements | LED |
Lamp socket | THT LED |
Soldering | Manual / wave |
Solder heat resistance according to standard | DIN EN 60068-2-20 |
Packaging unit | 30 pcs. |
net weight | 2.2 g |
Operating life electrical |
1,000,000 (1A / 250V AC) cycles
100,000 (2A / 250V AC) cycles 30,000 (4A / 250V AC) cycles |
B10 electrical |
1.300.000 (1A / 250V AC) cycles
200.000 (2A / 250V AC) cycles 70.000 (4A / 250V AC) cycles |
B10d | 140,000 cycles |
Environment resistance |
IEC 60068-2-14
IEC 60068-2-30 IEC 60068-2-33 IEC 60068-2-78 |
Shock resistance according to standard IEC 60068-2-27 | 50 g at 11 ms amplitude semi-sinusoidal |
Vibration resistance according to standard IEC 60068-2-6 | 5 g at 10 - 500 Hz |
MOQ order | 30 pcs. |
RoHS compliant | Yes |
REACH compliant | Yes |
Mounting dimensions |
|
Outside dimension, length | 17.3 mm |
Outside dimension, width | 17.3 mm |
Outside dimension, height | 16.9 mm |
Mounting depth | 9.2 mm |
Mechanical characteristics |
|
Contact function | 2 NC |
Contact system | Bridge contact |
Contact material | Silver |
Fixing | Soldering |
Solderability | Yes |
Terminal on the rear | THT |
Electrical characteristics |
|
Rated insulation voltage | 250 V |
Rated surge voltage | 2,500 V |
Rated voltage, min. | 10 V |
Rated voltage, max. | 250 V |
Rated current, min. |
|
Rated current, max. | 4 A |
Rated power, min. | 0.5 W |
Category of use AC-15 / B300 |
120 V / 3 A (IEC 60947)
240 V / 1,5 A (IEC 60947) |
Categories of use |
AC-15 / B300
DC-13 / Q300 |
Category of use DC-13 / Q300 |
120 V / 0,55 A (IEC 60947)
240 V / 0,27 A (IEC 60947) |
Conditional short circuit current | 1,000 A |
Drawings
Description
These switching elements have internal plungers and therefore can only be combined with emergency stop and mushroom pushbuttons.
The PCB switching elements are positioned on a PCB shared with other components. These can subsequently be mounted behind the front panel together with the actuators and signal indicators. The switching elements “float” directly underneath the actuators on the PCB behind the front panel and leave plenty of space for other components.
In the center channel of the switching element, there are either light conductors for the use of SMT-LEDs, or 3 mm THT LEDs can be installed for illumination.
PCB mounting depths
- 9.2 mm for RAFIX 22 FS+ and RAFIX 22 FSR
- 15.7 mm for RAFIX 30 FS+:
The NC contacts of these switching elements are forcibly separated according to IEC 60947-5-1.
- PCB contact block for RAFIX 22 FS+, RAFIX FSR and RAFIX 30 FS
- Only suitable for emergency stop and mushroom pushbutton
- Silver contacts (= black housing)
- Mounting: Soldering on printed circuit board
- Version with light guide for SMT LED, without light guide for THT LED
- marking:
- normally closed contacts = red plungers
- normally open contacts = green plungers
- N/C and N/O contacts = yellow plungers
Main areas of application
- Measurement-control-regulation
- Electrical engineering
- Mechanical and system engineering
- Signalling systems
- Vehicle construction
- Agricultural and forestry machinery
- Construction machinery
- Handheld terminals
- Industrial robots