RAFIX FS+ switching element emergency stop PCB, gold, for THT LED, 1 NO

Article number: 1.20.146.402/0000

Coming soon

Technical data

General
Disassembly possible	no
Color	slate gray
Operating temperature, min.	-40 °C
Operating temperature, max.	85 °C
Storage temperature, min.	-40 °C
Storage temperature, max.	85 °C
illuminated	Yes
Luminous elements	LED
Lamp socket	THT LED
Soldering	Manual / wave
Solder heat resistance according to standard	DIN EN 60068-2-20
Packaging unit	30 pcs.
net weight	1.9 g
Operating life electrical	1.000.000 (10mA / 24V DC) cycles
B10 electrical	1.300.000 (10mA / 24V DC) cycles
B10d	2,600,000 cycles
Environment resistance	IEC 60068-2-14 IEC 60068-2-30 IEC 60068-2-33 IEC 60068-2-78
Shock resistance according to standard IEC 60068-2-27	15 g at 11 ms amplitude semi-sinusoidal
Vibration resistance according to standard IEC 60068-2-6	5 g at 10 - 500 Hz
MOQ order	30 pcs.
RoHS compliant	Yes
REACH compliant	Yes

Mounting dimensions
Outside dimension, length	16.73 mm
Outside dimension, width	16.73 mm
Outside dimension, height	16.85 mm
Mounting depth	9.2 mm
Mechanical characteristics
Operating force, max.	100 N
Contact function	1 NO
Contact system	Bridge contact
Contact material	Gold
Fixing	Soldering
Solderability	Yes
Terminal on the rear	THT
Electrical characteristics
Rated insulation voltage	250 V
Rated surge voltage	500 V
Rated voltage, min.	0.02 V
Rated voltage, max.	35 V
Rated current, min.	0.001 A
Rated current, max.	0.1 A
Rated power, max.	0.25 W
Categories of use	AC-15 DC-13
Conditional short circuit current	1,000 A

Drawings

PCB drawing

Connection drawing

Description

These switching elements have internal plungers and can therefore only be combined with emergency stop and mushroom pushbuttons.

The PCB switching elements are placed on a common printed circuit board with other components. These can be attached behind the front panel with the actuating components and light indicators. Behind the front panel, the switching elements "float" directly under the actuating components on the PCB, leaving plenty of space for other components.

Mounting depths PCB:
- 9.2 mm for RAFIX 22 FS+ and RAFIX 22 FSR
- 15.7 mm for RAFIX 30 FS+

Either short or long light conductors for the use of SMT LEDs (RGB or single color) are integrated in the middle channel of the switching elements. Alternatively, 3 mm THT LEDs can be installed for lighting without light conductors.

The NC contacts of these switching elements are forcibly separated according to IEC 60947-5-1.

PCB contact block for RAFIX 22 FS+, RAFIX FSR and RAFIX 30 FS
Only suitable for emergency stop and mushroom pushbutton
Gold contacts (= grey housing)
Mounting: Soldering on printed circuit board
Version with light guide for SMT LED, without light guide for THT LED
marking:
- normally closed contacts = red plungers
- normally open contacts = green plungers
- N/C and N/O contacts = yellow plungers
- 2 N/C and 1 N/O contacts = red plungers