MICON 5, SMT standard, 1.5 ± 0.3 N, 1 NO
Article number: 1.14.002.201/0000
NRFND
Technical data
| Operating temperature, min. | -40 °C |
| Operating temperature, max. | 90 °C |
| Storage temperature, min. | -40 °C |
| Storage temperature, max. | 90 °C |
| illuminated | No |
| Soldering | Reflow |
| Solder heat resistance according to standard |
DIN EN 60068-2-58
DIN EN 61760-1 |
| Packaging | Blister |
| Packaging unit | 2,100 pcs. |
| net weight | 0.3 g |
| Operating life | 1,000,000 cycles |
| B10 | 1,300,000 cycles |
| MSL Moisture Sensitivity Level | 1 |
| Shock resistance according to standard IEC 60068-2-27 | 100 g at 6 ms amplitude semi-sinusoidal |
| oscillation restistance according to standard IEC 60068-2-6 | 5 g at 10...500 Hz |
| MOQ order | 2,100 pcs. |
| RoHS compliant | Yes |
| REACH compliant | Yes |
| Outside dimension, length | 6.4 ± 0.1 mm |
| Outside dimension, width | 5.1 ± 0.1 mm |
| Installation height | 3.85 ± 0.1 mm |
| Grid, min. | 6 x 7.8 mm |
| Actuation function | momentary contact function |
| Operating force, max. | 4 N |
| Operating force, min. | 1.5 ± 0.3 N |
| Switching travel | 0.7 ± 0.15 mm |
| Contact function | 1 NO |
| Contact system |
Snap-action contact
SPST - Single Pole Single Throw |
| Contact material | Gold |
| Solderability | Yes |
| Terminal on the rear | SMT |
| Rated voltage, min. |
|
| Rated voltage, max. | 35 V |
| Dielectric strength | 250 V |
| Rated current, min. |
|
| Rated current, max. |
|
| Rated power, max. | 1 W |
Drawings
Dimensioned drawing
System drawing
PCB drawing
PCB drawing
Schematic diagram
Product labeling drawing
Packaging drawing
Description
MICON 5 tactile switches offer extreme switching reliability, with a very small space requirement. They can be arranged individually, in rows or as key blocks. For use beneath overlays, we recommend combining the MICON 5 tactile switches with plungers. Here are the properties at a glance:
- Suitable for the most important soldering techniques
- Soldering bath for THT versions
- Reflow soldering for SMT versions
- Vapor phase soldering for SMT versions
- Manual soldering
- Processing of the SMT design with SMT automatic assembly machines
- IMDS entry
- Packaging in blister tape, spool with 2,100 pieces
- Proposal for stencil printing: 150 µm stencil with 10% pad reduction on area
Key switch 1.14.002.201/0000 does not offer any tactile or acoustic feedback. It is therefore usually only used as a redundant additional switch for other MICON standard key switches, if this is required for safety reasons.
3D viewer
Downloads
CAD_3D_MIC5-114002xx1
CP65 Document
Declaration of conformity
POP Document
RoHS
SVHC Document
TSCA Document
Soldering profile
PCN Product Change Notification
Follow-up article
MICON 5 S, SMT standard, 1.5 ± 0.3 N, 1 NO
Optional accessories
Plunger, MICON 5
